Ways to Clean a Motorcycle Properly

When you ride your new style motorcycle to travel, it probably will be attacked by muddy water and dust, which will cause your beautiful bike to become very dirty. If you don’t clean in time, it will be make your bike wear slowly. For example, motorcycle stainless steel chain with dust and muddy water is easy to be worn. Then how to clean a motorcycle properly? Here we will tell you the methods as below specific steps.

1. After you travel, ride your motorcycle to the indoor car washing site. At this time, you need to pay attention to the most critical point. Never wash the car body directly when motorcycle starter engine temperature is high! You can start operation until the engine temperature drop, especially in winter. We know that the temperature will not be too high in the car wash room of the garage or indoors. If the engine temperature is not lowered, washing the car body and engine with cold water will cause great damage to the engine.

2. When washing the motorcycle body with the water gun, be careful not to get too close to the body, and do keep a certain distance. Also don't face the motorcycle electric motor to wash directly. The right way is that washing it from the top of the car body diagonally. And do not rinse for too long, just wash away the floating soil on the surface of the car body. Areas that is too dirty, such as motorcycle body guards, can be flushed with targeted high pressure.

3. After washing the surface of the car body, spray the car washing foam evenly on the car body, and still be careful about the motorcycle starter motor part. Then wipe with a soft sponge for deep decontamination.

4. After deep cleaning, you can wait for two or three minutes to maximize the cleaning effect of the car wash. Then rinse it! Do not wipe dry with a car cloth immediately after washing it, because a motorcycle is different from a car. The body of the motorcycle is mostly exposed, and there will be many splicing and sleeve stitching places. After rinsing, it is inevitable that water will flow into places you can't see. At this time, you can use the blow gun in the garage to clean up, and carefully rinse the water in the gap or the water in the place that you can't wipe with a cloth. In this way, when you ride outside after washing, there will be no leakage of water freezing in the hidden places of the body.

5. After drying, wipe the surface of the body, motorcycle saddle seat and motorcycle two wheels with a cloth now. After thoroughly drying the car body, remember to use body wax to wax the motorcycles guard plate and other places. Wait for around five minutes after evenly waxing, and then wipe the waxed area clean and motorbike two tires with a dry cloth. Usually if the water is not wiped dry in winter, it is easy to be dangerous at low temperatures when it is running on the road.